AMSL Homepage

A. Journal paper:

Journal Articles in 2006

goto >> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

Guosong Lin, S. J. Hu, 2006, “A Computational Response Surface Study of Curved-surface-curved-edge Aluminum Hemming using Solid-to-shell Mapping.”, ASME Journal of Manufacturing Science and Engineering

J. Ko and S. J. Hu, (2006), “Balancing of manufacturing systems with complex configurations for delayed product differentiation,” accepted for publication in Int. J. of Production Research.

M. Chin, J.R. Barber, and S. J. Hu, 2006, “Effect of Elastic Recovery on the Electrical Contact Resistance in Anisotropic Conductive Adhesive Assemblies”, IEEE Transactions on Components and Packaging Technologies. Vol. 29, No. 1, June. pp. 137-144.

M. Li, T. Huang, D. G. Chetwynd and S. J. Hu, (2006), “Forward Position Analysis of a 3-DOF Module for Reconfigurable Hybrid Robots”, ASME Journal of Mechanical Design. v 128, n 1, Jan., p 319-22

S. J. Hu and J. Camelio, 2006, “Design and Control of Compliant Assembly Systems,” Accepted by Annals of the CIRP.

S. Swillo, K. Iyer and S. J. Hu, (2006), “Angled Line Method for Measuring Continuously Distributed Strain in Sheet Bending”, Accepted by ASME Journal of Manufacturing Science and Engineering.

W. Zhong and S. J. Hu, (2006), “Modeling Machining Geometric Variation in a N-2-1 Fixturing Scheme”, ASME Journal of Manufacturing Science and Engineering. Volume 128, Issue 1, pp. 213-219

Journal Articles in 2005

goto >> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

G. Lin, K. Iyer, S. J. Hu, W. Cai and S. Marin, (2005) “A computational design-of-experiments study of hemming processes for automotive aluminium alloys”, Journal of Engineering Manufacture. Volume 219, Number 10 , pp.711 - 722

J. Camelio, S. J. Hu, and H. J. Yim, (2005), “Optimal Sensor Placement for Designated Component Analysis in Compliant Assembly”. ASME Journal of Manufacturing Science and Engineering. Vol. 127, pp.68-74. Feb. Also published in the Proceedings of the 2003 ASME International Mechanical Engineering Conference and Exposition, Washington, DC.

J. Ko, S. J. Hu and T. Huang, 2005, “Reusability Assessment for Manufacturing Systems”, Annals of CIRP, Vol. 54/1. pp. 113-116.
G. Liu and S. J. Hu, (2005), “Assembly Fixture Diagnosis Using Designated Component Analysis”, ASME J. of Mfg. Science and Engineering. Vol. 127, May.

J. Yue, Jaime Camelio, and S. J. Hu, (2005), “Shape Representation Method for Variation Analysis in Compliant Assembly”, Submitted to International Journal of Machine Tools and Manufacture.

K. Iyer, S. J. Hu, F. Brittman, P.C. Wang, D. Hydan, “Fatigue of Single and Double Rivet Self-Piercing Riveted Lap Joints”, Accepted by Fatigue and Fracture of Engineering Materials and Structures. Also published at ASME IMECE 2002. Symposium on Automotive Body Assembly and Joining. November 17-22. New Orleans, LA.

M. Li, T. Huang, D. Zhang, X.. Zhao, S. J. Hu and D. G. Chetwynd, (2005), “Conceptual Design and Dimensional Synthesis of a Reconfigurable Hybrid Robot”, ASME Journal of Manufacturing Science and Engineering. AUGUST 2005, Vol. 127, pp.647-653

Meng Li, Tian Huang, Jiangping Mei, Xueman Zhao, D. G. Chetwynd and S. J. Hu, 2005, “Dynamic Formulation and Performance Comparison of the 3-DOF Modules of Two Reconfigurable PKM—the Tricept and the TriVariant”, ASME J. Mechanical Design. v 127, n 6, November, 2005, p 1129-1136

R. Webbink and S.J. Hu, (2005) “Automatic Generation of Assembly System Solutions”, IEEE Transactions on Automation Science and Engineering. Vol. 2, No. 1, pp 32-39. January.

S. Swillo, G. Lin, S. J. Hu, K. Iyer, J. Yao, M. Koc, W. Cai, (2005), “ Detection and Characterization of Surface Cracking in Sheet Metal Hemming Using Optical Method”, Transactions of NAMRI/SME, Vol. 33.

T. Huang, M. Li, Z. X., Li, G. Chetwynd and S. J. Hu, (2005), “Conceptual Design and Dimensional Synthesis for a 3-DOF Module of the TriVariant -A Novel 5-DOF Reconfigurable Hybrid Robot”, IEEE Transaction on Robotics, Vol. 21, No. 3, June, p p449-456.

W. L. Wang and S. J. Hu, 2005, “Modal response and frequency shift of the cantilever in a noncontact atom force microscope”, Applied Physics Letter, 87, 183506.

Journal Articles in 2004

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

J. Camelio and S. J. Hu, 2004, “Multiple Fault Diagnosis for Sheet Metal Fixtures using Designated Component Analysis”. ASME Journal of Manufacturing Science and Engineering, Volume 126, Issue 1, pp. 91-97.

J. Camelio, S. J. Hu, D. Ceglarek, (2004), “Impact of Tooling on Compliant Assembly Variation”, SME J. of Manufacturing Systems. Vol. 23, n 3, 2004, p 182-193. Also published in 2002 ASME for Design Engineering Technical Conference, Montreal, September.

J. Camelio, S. J. Hu, S. P. Marin, (2004), “Compliant Assembly Variation Analysis Based on Geometric Covariance ”, ASME J. Mfg. Sci. Eng. Vol. 126 (2): 355-360.

J. Camelio, Weiping Zhong, and S. J. Hu, (2004), “Diagnosis of Multiple Fixture Faults in Machining Using Designated Component Analysis”, Journal of Manufacturing Systems, v 23, n 4, p 309-315. Also published in Trans. of NAMRI/SME. Vol. XXXI, pp.201-208, 2003.

J. Senkara, H. Zhang , and S. J. Hu, (2004) “ Expulsion prediction in resistance spot welding”, Welding Journal, 83 (4): 123S-132S APR.

M. Chin, K. A. Iyer, and S.J. Hu, 2004, “Prediction of Electrical Contact Resistance for Anisotropic Conductive Adhesive Assemblies”, IEEE Transactions on Components and Packaging Technologies. Vol. 27, No. 2, June. Pp. 317-326.

S. Lu, S. J. Hu and K. Iyer, 2004, “Functional Characterization of Surface Roughness Generated by Plateau Honing Process Using Wavelet Analysis”, SAE Transactions J. of Materials and Manufacturing.

T. Freiheit, T., M. Shpitalni, M., S. J. Hu, 2004, “Productivity of Paced Parallel-Serial Manufacturing Lines with and without Crossover,” ASME Journal of Manufacturing Science and Engineering, 126 (2): 361-367 MAY. also published in the Proceedings of the 2002 IMECE, November 17-22, 2002, New Orleans, LA.

T. Freiheit, T., M. Shpitalni, S. J. Hu , and Y. Koren, 2004, “Productivity of Synchronized Serial Production Lines with Flexible Reserve Capacity”, International Journal of Production Research, 15, May. Vol. 42, No. 10. pp.2009-2027.

T. Freiheit, T., Y. Koren, Y., S. J. Hu, S., (2004), “Productivity of Parallel Production Lines with Unreliable Machines and Material Handling,” IEEE Transactions on Automation Science and Engineering, Vol. 1, July, 2004, pp.98-103.

W.L. Wang, and S, J. Hu, 2004, “Geometry and Surface Characterization of Micro Holes in Fuel Injector Nozzles”, Nanotechnology and Precision Engineering, Vol. 2, No. 1, pp. 65-70

Y.X. Chu, S.J. Hu, W.K. Hou, P.C. Wang and S. P. Marin, 2004, “Signature Analysis for Quality Monitoring in Short Circuit GMAW”, Welding Journal, December, pp.336s-343s.

Journal Articles in 2003

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

C. L. Chow, M. Jie, S. J. Hu, (2003), “Forming Limit Analysis of Sheet Metals Based on Generalized Deformation Theory”, ASME J. of Engineering Materials and Technology, Vol. 125, pp. 260-265.

F. Wang, W. K. Hou, S.J. Hu, E. Kannatey-Asibu, W.W. Schultz, P.C. Wang, (2003), “Modelling and analysis of metal transfer in gas metal arc welding”, Journal Of Physics D-Applied Physics , 36 (9): 1143-1152 MAY 7 2003

G. Casalino, S.J. Hu, W. Hou, 2003, “Deformation prediction and quality evaluation of the gas metal arc welding butt weld”, Proceedings of Institute of Mechanical Engineers, J. of Engineering Manufacture, 217 (11): 1615-1622.

G. Zhang, S. Jack Hu and Xin Wu, (2003), “Numerical analysis and optimization of hemming processes”, SME J. of Manufacturing Processes. May.

G. Zhang, J. Yao, S. J. Hu, and X. Wu, (2003), “Shrink Flanging with Surface Contours”, SME J. of Mfg Processes, Vol. 5, No. 2. pp.143-153.

H. Tang, W. Hou, S. J. Hu, H. Y. Zhang, Z. Feng and M. Kimchi, (2003), “Influence of Welding Machine Mechanical Characteristics on the Resistance Spot Welding Process and Weld Quality”, Welding Journal, May, 116s-124s.

J. Camelio, S. J. Hu and D. Ceglarek, (2003), “Modeling Variation Propagation in Multi-Station Assembly Systems With Compliant Parts”, ASME Journal of Mechanical Design. Volume 125, Issue 4, December. pp. 673-681. Also published in Proceedings of 2001 ASME DETC. (Won best paper award in Design for Manufacturing Conference).

M. Zhou, H. Zhang, and S. J. Hu, (2003), “Relationships Between Quality and Attributes of Spot Welds”, Welding Journal, vol. 82 (4), pp. 72-s to 77-s.

V. Maier-Speredelozzi, Y. Koren and S. J. Hu, (2003), “Convertibility Measures for Manufacturing Systems,” Annals of the CIRP. Vol. 52, No. 1. pp. 367-370.

S. He, X. Wu and S. J. Hu, (2003), “Formability Enhancement for Tailored Welded Blanks Using Blank Holding Force Control”, ASME Journal of Manufacturing Science and Engineering. August. Vol. 125. pp.461-467. Also published in the Proceedings of IMECE 2001, MED, New York.

S. J. Hu, R. Webbink, J. Lee, and Y. Long, (2003), "Robustness Evaluation For Compliant Assembly Systems", ASME Journal for Mechanical Design. Volume 125, Issue 2, pp. 262-267. also presented at the 2000 DETC Design for Manufacturing Conference, Baltimore.

T. Freiheit, M. Shpitalni, S. J. Hu and Y. Koren, (2003), “Designing Productive Manufacturing Systems without Buffers,” Annals of the CIRP. Vol. 52, No. 1. pp105-108.

W. L. Wang, S. J. Hu, and R. Clarke, 2003, “Effects of three dimensional atomic forces in topographical imaging of atoms with an atom force microscope”, Physical Review B, Vol. 68, No. 245401, Dec.

Y. Cho, S. J. Hu, W. Li , (2003), “Resistance spot welding of aluminium and steel: a comparative experimental study,” Proceedings of Institute of Mechanical Engineers, J. of Engineering Manufacture, 217 (10): 1355-1363.

Journal Articles in 2002

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

H. Tang, W. Hou and S. J. Hu, (2002), “Forging Force in Resistance Spot Welding”, Proceedings of the Institute of Mechanical Engineers, Part B: J. of Engineering Manufacture. 216(7), pp. 957-968.

S. Jack Hu, R. Webbink, J. Lee, Y. Long and, (2002), "Robustness Evaluation For Compliant Assembly Systems", accepted by ASME Journal for Mechanical Design. also presented at the DETC Design for Manufacturing Conference, Baltimore.

V. Maier-Speredelozzi and S. J. Hu, (2002), “Selecting Manufacturing System Configuration Based on Performance”, accepted by Transactions of NAMRI/SME.

T. Freiheit and S. J. Hu, (2002). “Impact of Machining Parameters on Machine Reliability and System Productivity”, ASME Journal of Manufacturing Science and Engineering. May, Volume 124, Issue 2, pp. 296-304.

Journal Articles in 2001

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

W. Li, S. J. Hu and S. Cheng, (2001) “Robust Design For Manufacturing Processes With Parameter Interdependency”, Transactions of NAMRI/SME, pp. 647 – 653. Also accepted for publication in SME J. of Mfg Systems.

G. Zhang, S. J. Hu and X. Wu, (2001), "A study on fundamental mechanisms of warp and recoil in hemming", ASME Journal of Engineering Materials and Technology. November, vol. 123, pp.436-441. Also published in Proceedings of IMECE-2000, Manufacturing Science and Engineering.

W. Li, S.W. Cheng, S.J. Hu, and J. Shriver (2001), “Statistical Investigation of Resistance Welding Quality Using Two-Stage Sliding Experiments,” ASME Journal of Manufacturing Science and Engineering. August. Vol. 123, pp. 513-520. Also published in Proceedings of IMECE-2000, Manufacturing Science and Engineering.

Journal Articles in 2000

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

Y. G. Liao and S. J. Hu, (2000), “An Integrated Model of a Fixture-Workpiece System for Surface Quality Prediction”, International Journal of Advanced Manufacturing Technology, vol. 17, pp810-818.

H. Tang, W. Hou, S. J. Hu and H. Zhang, (2000), “Force Characteristics in Resistance Spot Welding”, Welding Journal. Vol. 79(7), 175s-183s.

J. Senkara, Hongyan Zhang, and S. Jack Hu, (2000), “Expulsion Prediction in Resistance Spot Welding”, Accepted by the Welding Journal.

H. K. Chen, S.J. Hu and T.C. Woo, (2000), “Visibility Analysis and Synthesis for Tooling Certification”, ASME J. of Manufacturing Science and Engineering, August.

M. Zhou, H. Zhang and S. J. Hu, (2000), “Impact Strength Measurement and a New Impact Tester”, Accepted by the Proceedings of Mechanical Engineers Part B: Journal of Engineering Manufacture.

W. Li, S.J. Hu, and J. Ni, (2000), "A Method for On-Line Quality Prediction of Resistance Spot Welding", ASME J. of Manufacturing Science and Engineering. Vol. 122, pp.511-512.

H. Zhang, S. J. Hu, J. Senkara, and S. Cheng, (2000), “A Statistical Analysis of Expulsion Limits in Resistance Spot Welding,” ASME Journal of Manufacturing Science and Engineering, Vol. 122, August, pp. 501-510.

G. Zhang, H. Hao, X. Wu, S. J. Hu, K. Haper and W. Faitel, (2000), "Design of Experiments on Curved Surface-Straight Edge Hemming", Transactions of NAMRI. Also published in SME Journal of Manufacturing Processes, Vol. 2, No. 2, pp.241-246.

S. Yang, C. Wu and S. J. Hu, (2000), "Modeling and Analysis of Multi-Stage Transfer Lines with Unreliable Machines and Finite Buffers", Annals of Operations Research, 93(2000), pp.405-421.

Gene Liao and S. J. Hu, (2000), “Flexible Multibody Dynamics Based Fixture-Workpiece Analysis Model for Fixturing Stability", International Journal of Machine Tools and Manufacture, 40(2000), pp.343-362.

Journal Articles in 1999

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

M. Zhou, S. J. Hu, and H. Zhang, (1999), “Critical Specimen Sizes for Tensile-Shear Testing of Welded Steel Sheets,” Welding Journal. 78(9), pp.305s-313s.

W. Li, S. J. Hu, and J. Ni, (1999), "On-line Expulsion Detection and Estimation for Resistance Spot Welding," Transactions of NAMRI.

J.-K. Lee, S. J. Hu, and A. Ward, (1999), “Workspace Synthesis for Flexible Fixturing of Stampings”, ASME J. of Manufacturing Science and Engineering, August, pp.478-484.

Journal Articles in 1998

goto>> ... 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992

Y. H. Jang, J. R. Barber, and S. J. Hu, (1998), “Electrical Conductance between Dissimilar Materials with Temperature Dependent Properties”, Journal of Physics D: Applied Physics. Vol. 31, No. 22, pp.3197-3205, November.

Y. J. Long and S. J. Hu, (1998), “A Unified Model for Variation Simulation of Sheet Metal Assemblies”, in Geometric Design Tolerancing: Theories, Standards and Applications, Ed. Dr. Hoda A. ElMaraghy, Chapman & Hall. pp.208-219. Also appeared in Proceedings of the CIRP Seminar on Computer Aided Tolerancing. Toronto, Canada, May, 1997.

S. J. Hu and Y. G. Liu (1998) "Process Mean Shift Detection Using Prediction Error Analysis," Journal of Manufacturing Science and Engineering. Vol. 120, pp.489-495. August.

Y. Koren, S. J. Hu., and T. W. Weber, (1998), “Impact of Manufacturing System Configuration on Performance”, Annals of the CIRP, Vol. 47/1.

J. Liao, S. J. Hu, and D. Stephenson, (1998), “Optimization of Fixture Configuration considering Fixture-Workpiece Contact”, Transactions of NAMRI/SME.

S. C. Liu and S. J. Hu, (1998), "Sheet Metal Assembly Joint Configurations and Their Variation Characteristics", ASME Journal of Manufacturing Science and Engineering. Vol. 120, pp. 461-467, May.

Z. T. Zhang and S. J. Hu, (1998), “Stress and Residual Stress Distributions in Plane Strain Bending”, International Journal of Mechanical Sciences, Vol. 40, No. 6, pp.533-543.

Journal Articles in 1997

goto>> ... 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 ...

S. J. Hu, (1997), “Stream of Variation Theory for Automotive Body Assembly”, Annals of the CIRP, Vol. 46/1, pp.1-6.

W. J. Cai, S. J. Hu, and Jingxia Yuan, (1997), "A Variational Method of Robust Fixture Configuration Design for 3-D Workpieces", ASME Journal of Manufacturing Science and Engineering. Vol.119, pp.593-602, November.

S. C. Liu and S. J. Hu, (1997), "Variation Simulation for Deformable Sheet Metal Assembly Using Finite Element Methods", ASME Journal of Manufacturing Science and Engineering, Vol. 119, pp.368-374. August.

S.C. Liu and S. J. Hu, (1997), "A Parametric Study of Joint Performance in Sheet Metal Assembly", International Journal of Machine Tools and Manufacture. Vol. 37, No. 6, pp. 873-884,

Z. T. Zhang and S. J. Hu, (1997), "Mathematical Modeling of Plane Strain Bending", SAE Technical Paper, #970439.

Journal Articles in 1996

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. J. Hu, (1996) "Statistical Process Control For Correlated Processes - Case Studies In Automotive Manufacturing", IASTED J. of Modeling and Simulation, Special Issue on Manufacturing Reliability. pp. 218-223.

W. J. Cai, S. J. Hu, and J. Yuan, (1996), "Deformable Sheet Metal Fixturing: Principles, Algorithms and Simulations", ASME Journal of Engineering for Industry. Vol.118, pp. 318-324, August. (Also published at 1994 ASME IMECE Proceeding, Manufacturing Science and Engineering-1994, PED Vol. 68-1, pp. 13- 20. )

S. J. Hu and C. Roan (1996), " Change Patterns of Time Series Based Control Charts", ASQC Journal of Quality Technology, pp. 302-312, July.

U. N. Gandhi and S. J. Hu, (1996) "Data Based Models for Automobile Side Impact Analysis and Design Evaluation," International Journal of Impact Engineering, Vol. 18, No. 5, pp. 517-537.

W. J. Cai, and S. J. Hu, (1996), " Optimal Fixture Configuration Design for Sheet Metal Assembly with Springback ", Transactions of NAMRI/SME. pp. 229-234, May.

S. C. Liu, S. J. Hu, and T. C. Woo, (1996) "Tolerance Analysis for Sheet Metal Assemblies". ASME Journal of Mechanical Design. Vol. 118, pp. 62-67.

Journal Articles in 1995

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. C. Liu and S. J. Hu, (1995), "An Offset Finite Element Model and Its Application in Predicting Sheet Metal Assembly Variation", Int. J. Machine Tools and Manufacture Vol. 35, No. 11, pp. 1545-1557.

D. Khorzad, J. Shi, S. J. Hu, J. Ni, and G. Seliger, (1995), "Multiple Panel Fitting for Automobile Manufacturing". Transactions of NAMRI/SME, pp. 241-247, May.

S. C. Liu, H.-W. Lee, and S. J. Hu, (1995), "Variation Simulation for Deformable Sheet Metal Assemblies Using Mechanistic Models", Transactions of NAMRI/SME. pp. 235-241, May.

C. Roan and S. J. Hu, (1995), "Monitoring and Classification of Dimensional Faults for Automotive Body Assembly," International Journal of Flexible Manufacturing Systems. Vol. 7, No. 2, pp. 103-125, April.

U. N. Gandhi and S. J. Hu, (1995), "Data Based Approach in Modeling Automobile Crash," International Journal of Impact Engineering, Vol. 16, No. 1, pp. 95-118.

Journal Articles in 1994

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

H. T. Fan, S. J. Hu, and S. M. Wu, (1994) "Forecasting Control of Waterborne Basecoat Viscosity," Transactions of ASME, Journal of Engineering for Industry, Vol. 116, pp. 514-516, November.

S.- K. Wu, S. J. Hu, and S. M. Wu, (1994), "A Fault Identification and Classification Scheme for an Automobile Door Assembly Process,". International Journal of Flexible Manufacturing Systems , Vol. 6, pp. 261-285, October.

S.- K. Wu, S. J. Hu, and S. M. Wu, (1994), "Optimal Door Fit With Systematic Fixture Adjustment," International Journal of Flexible Manufacturing Systems , Vol. 6, No. 2, pp. 99-121, April.

Journal Articles in 1993

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

M. R. Rearick, S. J. Hu, and S. M. Wu, (1993), "Optimal Fixture Design for Deformable Sheet Metal Workpiece," Transactions of NAMRI, Vol. XXI, pp. 407-412, May.

Journal Articles in 1992

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. J. Hu and S. M. Wu, (1992), "Identifying Sources of Variation in Automobile Body Assembly Using Principal Component Analysis," Transactions of NAMRI, Vol. XX, pp. 311-316, May.

Journal Articles in 1991

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. J. Hu, S.- K. Wu, and S. M. Wu, (1991), "Multivariate Analysis and Variation Reduction Case Studies in Automobile Assembly ," Transactions of NAMRI, Vol. XIX, pp. 303-308, May .

Journal Articles in 1990

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. J. Hu and S. M. Wu, (1990), "In-Process 100% Measurement and Statistical Analysis for an Automotive Body Assembly Process," Transactions of NAMRI, Vol. XVIII, pp.317-321, May.

Journal Articles in 1989

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. J. Hu and S. M. Wu, (1989), "Prony Estimation of AR Parameters of an ARMA Time Series," Mechanical Systems and Signal Processing, 1989, 3(2), pp.207-211.

B. Refereed conference papers or symposium proceedings:

Conference Articles in 2006

goto >> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

Conference Articles in 2005

goto >> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

Conference Articles in 2004

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

Conference Articles in 2003

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

Conference Articles in 2002

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

J. Camelio, S. J. Hu, D. Ceglarek, (2002), “Impact of Tooling on Compliant Assembly Variation”, Accepted for Design Engineering Technical Conference, Montreal, September.

C. Franke, G. Seliger, S. J. Hu, and Y. Koren (2002), “A New Paradigm in Manufacturing: Selling Use rather than Selling Systems”, Accepted by Japan-USA Symposium for Flexible Automation, Hiroshima, Japan. July.

Y. Long, S. J. Hu, and R. Soderberg (2002), “Incorporating Fixture Variation in Compliant Assembly Variation Analysis”, Accepted by Japan-USA Symposium for Flexible Automation, Hiroshima, Japan. July.

N. Seshadri, S. J. Hu, and X. Wu (2002), “Adaptive Strain Measurement for Sheet Metal Stampings”, Published in by Proceedings of the SAE World Congress and Exhibition.

S. He, X. Wu and S. J. Hu, (2002), “Formability Improvement for TWB Using Drawbead Design”, Published in by Proceedings of the SAE World Congress and Exhibition.

Conference Articles in 2001

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

H. Orban, S. J. Hu, J. L. Duncan, and G. Morphy, (2001), “Deformation During High and Pressure Sequence Hydroforming”, Published in the Proceedings of ASME IMECE.

Conference Articles in 2000

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

S. J. Hu, J. Camelio and Y. Long, (2000), "Variation Analysis for Compliant Assembly", Proceedings of IMECE-2000, Manufacturing Science and Engineering.

L. S. Xie and S. J. Hu and A. Sudjianto, (2000), "Fixture Configuration Design Using Computer Experiment. Part I: Surrogate Model Building", Proceedings of IMECE-2000, Manufacturing Science and Engineering.

W. Li, S. J. Hu, and H. Zhang, (2000), "Signal Processing Issues in Resistance Spot Welding", AWS Sheet Metal Welding Conference, Detroit.

S. W. Cheng, H. Zhang and S. J. Hu, (2000), "Statistical Design, Analysis and Inference in Resistance Welding Research", AWS Sheet Metal Welding Conference, Detroit.

H. Zhang, S. J. Hu, and J. Senkara, (2000), "Quality and Testing in Resistance Welding", International Conference on Frontiers in Design and Manufacturing.

Weiping Zhong, Valerie Maier-Speredelozzi, Anne Bratzel, Sheng Yang and S. Jack Hu, (2000), "Performance Analysis of Machining Systems with Different Configurations", U.S.A. - Japan Symposium on Flexible Automation.

S. Yang and S. J. Hu, (2000), "Productivity Analysis of Manufacturing Systems with Different Configurations", U.S.A. - Japan Symposium on Flexible Automation.

Conference Articles in 1999

goto>> 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 ...

H. Tang, W. Hou and S. J. Hu, (1999), “Servo Guns for Resistance Spot Welding”, SAE 2000.

S. Yang, S. J. Hu and Y. Koren, “Approximate Analysis of Production Lines with Loop, Scrapping and Serial/Parallel Blocks”, Second Aegean International Conference in Greece.

J. Shriver, H. Peng and S. J. Hu, (1999), “Nonlinear Modeling of resistance Spot Welding for Fault Detection and Control”, American Control Conference.

J. Liu, S. J. Hu and J. Yuan, (1999), “Fixture Configuration Design Based on Topology Optimization”, Published in ASME IMECE 1999.

S. J. Hu, (1999), "Assembly Modeling for Quality Design and Manufacturing," International Conference on Quality Manufacturing, Stellenbosch, South Africa.

Conference Articles in 1998

goto>> ... 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 ...

H. Zhang, J. Senkara, and S. J. Hu, (1998), “Expulsion Modeling in RSW of Steel and Aluminum Alloys”, Sheet Metal Welding Conference VIII, Oct. 1998, Troy, MI., Paper 3-4.

H. Zhang, M. Zhou, S. J. Hu, J. Bohr, and W. H. Trojanowski, (1998), “Impact Strength Measurement of Spot Welds”, Sheet Metal Welding Conference VIII, Oct., 1998. Troy, MI., Paper 1-3.

Y. Long and S. J. Hu, (1998), “Diagnosability and Measurement Configurations for Automotive Body Assembly”, Manufacturing Science and Engineering, MED-Vol.8, pp.305-313.

N. Sheshadri, X. Wu and S. J. Hu, (1998), “Impact of Die Manufacturing Variability on Drawbead Restraining Forces”, Manufacturing Science and Engineering, MED-Vol.8, pp. 241-249.

J. Shriver, S. J. Hu, and H. Peng, (1998), “Resistance Spot Welding: A Neural Network Approach to Modeling”, Manufacturing Science and Engineering, MED-Vol.8, pp. 201-211.

Conference Articles in 1997

goto>> ... 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 ...

S. J. Hu, (1997), “The ‘Virtual Body Shop’ – A Testbed for Automotive Body Assembly System Processing and Design”, Proceedings of the 4th International Conference on Manufacturing Technology, Hong Kong, December.

Conference Articles in 1996

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

Hongyan Zhang, Y. Huang, and S. Jack Hu, (1996), “Nugget Growth in Spot Welding of Aluminum Alloys”, AWS Sheet Metal Welding Conference, Detroit, Michigan, October 9 - 11, 1996.

S.J. Hu, J. Senkara, Hongyan Zhang, (1996), “Performance Characteristics of Resistance Spot Welds in the Automotive Industry: A Structural Point of View”, International Body Engineering Conference, Detroit, Michigan.

J. Lee, A. Ward, and S.J. Hu, (1996), “Set Based Approach to Stamping Designs”, ASME Design Theory and Methodology Conference, 1996.

Conference Articles in 1995

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. C. Liu and S. J. Hu, "Spot Weld Sequence: Its Analysis and Synthesis", 1995 ASME IMECE Proceeding, Manufacturing Science and Engineering-1995, MED-Vol. 2-2, pp. 1145-1156.

Conference Articles in 1994

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

H.-W. Lee and S. J. Hu, (1994), "Variability Characterization and Tolerancing for Auto Body Manufacturing", Proceedings of the International Body Engineering Conference, Detroit, Michigan, September 26-29.

S. J. Hu, (1994), "Performance Monitoring and Control for Automotive Manufacturing", Japan-USA Symp. on Flexible Automation, Kobe, Japan, July 11-14.

C. Roan and S. J. Hu, (1994), "Multivariate Monitoring and Classification of Dimensional Faults for Automotive Body Assembly," First S. M. Wu Symposium on Manufacturing Sciences, Beijing, China, July.

J. Shi, S.J. Hu, and D. Ceglarek, (1994), “Process Navigator for Automotive Body Assembly”, First S. M. Wu Symposium on Manufacturing Sciences, Evanston, USA, May.

S. C. Liu and S. J. Hu, (1994), "Variation Stack-up for Deformable Sheet Metal Assembly - One Dimensional Models." First S. M. Wu Symposium on Manufacturing Sciences, Evanston, USA, May.

Conference Articles in 1993

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

C. Roan, S. J. Hu, and S. M. Wu, (1993). "Computer Aided Identification of Root Causes of Variation in Automobile Body Assembly," Manufacturing Science and Engineering, Proceedings of ASME Winter Annual Meeting Production Engineering Division, New Orleans, Louisiana. Nov. 28-Dec. 3.

Conference Articles in 1992

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

Conference Articles in 1991

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. M. Wu and S. J. Hu, (1991), "Statistical Process Control Using 100% Measurement Data for Automobile Body Assembly". Proceedings of the 42nd Session of the International Statistical Institute, Cairo, Egypt. September.

Conference Articles in 1990

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. M. Wu and S. J. Hu, (1990), "Impact of 100% In-Process Measurement on Statistical Process Control in Automobile Body Assembly", Monitoring and Control in Manufacturing, Ed. S. Liang, T. C. Tsao, ASME Winter Annual Meeting, Nov.

S. M. Wu and S. J. Hu, (1990), "Preventive Quality Control and Concurrent Engineering", Second Annual Symposium on Mechanical System Design in a Concurrent Engineering Environment, University of Iowa, October.

Conference Articles in 1989

goto>> ... 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 1989 ...

S. M. Wu, J. Ni, S. Hu, (1989), "Next Generation Quality Control in Manufacturing", ASME Winter Annual Meeting, San Francisco, CA, Dec.

S. Hu, Y. Chen, and S. M. Wu, (1989), "Multi-input Multi-output Modal Parameter Identification by Vector Time Series Modeling", 12th ASME Biennial Conference on Vibration and Noise, Montreal, Canada. Sept.

Related Link